Data & Methodology — Scott County

Full contaminant data, sample history, and sourcing for Scott County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

14883 total samples analyzed across 24 analytes. Data spans 1930 to 2024.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. VA Avg
Chloride 107 1930–2024 100%
8% of limit ↓ 30% below
Radon 9 1997–2000 100%
12% of limit ↓ 86% below
Sulfate 61 1930–2023 100%
4% of limit ↓ 60% below
PFNA municipal 21 2023–2024 0%
0% of limit
PFOS municipal 21 2023–2024 0%
0% of limit
PFOA municipal 21 2023–2024 0%
0% of limit
PFHxS municipal 21 2023–2024 0%
0% of limit
Arsenic 2 1979–1980 50%
10% of limit ↑ 32% above
Iron 10 1930–1953 90%
17% of limit ↓ 79% below
HFPO-DA (GenX) municipal 21 2023–2024 0%
0% of limit
Iron 10 1930–1953 90%
17% of limit ↓ 79% below
Arsenic 2 1979–1980 50%
10% of limit ↑ 32% above
PFBS municipal 21 2023–2024 0%
pH 19 1950–2016 100% ~ typical
Sodium 101 1930–2023 100% ~ typical
Fluoride 1 1954 0%
Nitrate 1 1967 0%
Nitrite 1 1974 0%
Manganese 1 1979 0%
Lead 1 1980 0%
Total Coliform 1 1998 0%
E. coli 1 1998 0%
Uranium 1 2000 0%
Hardness 30 2001–2022 100% ~ typical

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across VA.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Chloride 107 samples
  • Sulfate 61 samples
  • pH 19 samples
  • Sodium 101 samples
  • Hardness 30 samples

Limited data (<15 samples) — interpret with caution

  • Radon 9 samples
  • Arsenic 2 samples
  • Iron 10 samples
  • Iron 10 samples
  • Arsenic 2 samples
  • Fluoride 1 sample
  • Nitrate 1 sample
  • Nitrite 1 sample
  • Manganese 1 sample
  • Lead 1 sample
  • Total Coliform 1 sample
  • E. coli 1 sample
  • Uranium 1 sample

No private-well PFAS data for Scott County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Scott County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Scott County

17 Active public water systems
16,390 Residents on public water

Public water systems in Scott County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

CDC Health Outcome Correlations

Where contaminants detected in Scott County have established associations with specific health outcomes, we cross-reference CDC PLACES county-level prevalence data. This is a contextual signal, not a causal claim.

Contaminant Associated Condition Scott County Prevalence VA Average Source Year
Radon Cancer prevalence 8.9% 6.7% 2020

Source: CDC PLACES county-level estimates. Raw data: Download Scott County CDC PLACES data →

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in VA with at least one sample for that analyte.

Last updated: 2026-06-01

Full methodology →