Data & Methodology — Hutchinson County

Full contaminant data, sample history, and sourcing for Hutchinson County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

223 well testing events on record, covering 20 analytes. Data spans 1965 to 2022.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. TX Avg
Iron 95 1961–2021 46%
25% of limit ↓ 84% below
Arsenic 69 1991–2021 58%
24% of limit ↓ 37% below
Chloride 7 1977–2020 100%
3% of limit ↓ 92% below
Fluoride 219 1961–2021 99%
41% of limit ↑ 71% above
HFPO-DA (GenX) municipal 10 2023–2025 0%
— —
Lead 63 1977–2021 10%
2% of limit ↓ 87% below
Manganese 69 1977–2021 41%
3% of limit ↓ 95% below
Nitrate 23 1977–2020 100%
19% of limit ~ typical
Nitrite 7 1977–2020 14%
1% of limit ~ typical
PFHxS municipal 10 2023–2025 0%
— —
PFNA municipal 10 2023–2025 0%
— —
PFOA municipal 10 2023–2025 0%
— —
PFOS municipal 10 2023–2025 0%
— —
Radon 1 1999 100%
11% of limit ↓ 69% below
Sulfate 7 1977–2020 100%
12% of limit ↓ 59% below
Uranium 30 1999–2021 100%
22% of limit ↑ 44% above
Hardness 7 1977–2020 100%
— ~ typical
Sodium 7 1977–2020 100%
— ↓ 82% below
pH 7 1977–2020 100%
— ~ typical
PFBS municipal 10 2023–2025 0%
— —

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across TX.

Compare your result with Hutchinson County

Of the 69 arsenic tests on record for Hutchinson County (1991–2021), 42% found none, and half were below 1.94 µg/L.

Of the 219 fluoride tests on record for Hutchinson County (1961–2021), 1% found none, and half were below 1.62 mg/L.

Of the 95 iron tests on record for Hutchinson County (1961–2021), 54% found none.

Of the 63 lead tests on record for Hutchinson County (1977–2021), 90% found none.

Of the 69 manganese tests on record for Hutchinson County (1977–2021), 59% found none.

Of the 23 nitrate tests on record for Hutchinson County (1977–2020), 0% found none, and half were below 1.86 mg/L.

Of the 30 uranium tests on record for Hutchinson County (1999–2021), 0% found none, and half were below 6.7 µg/L.

Have a number from your lab? Enter it to see where it falls. Nothing is sent anywhere.

Want the full picture for your well? Check all your results.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 95 samples
  • Arsenic 69 samples
  • Fluoride 219 samples
  • Lead 63 samples
  • Manganese 69 samples
  • Nitrate 23 samples
  • Uranium 30 samples

Limited data (<15 samples) — interpret with caution

  • Chloride 7 samples
  • Nitrite 7 samples
  • Radon 1 sample
  • Sulfate 7 samples
  • Hardness 7 samples
  • Sodium 7 samples
  • pH 7 samples

No private-well PFAS data for Hutchinson County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Hutchinson County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Hutchinson County

11 Active public water systems
24,346 Residents on public water
6% Households on private wells

Public water systems in Hutchinson County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in TX with at least one sample for that analyte.

Last updated: 2026-08-04

Full methodology →