Data & Methodology — Fannin County

Full contaminant data, sample history, and sourcing for Fannin County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

279 well testing events on record, covering 22 analytes. Data spans 1965 to 2022.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. TX Avg
Radon 1 2016 100%
103% of limit
Iron 191 1938–2019 82%
33% of limit
Manganese 147 1941–2019 42%
9% of limit
Fluoride 262 1938–2019 100%
35% of limit
Arsenic 59 1983–2019 7%
24% of limit
Chloride 1 2016 100%
18% of limit
HFPO-DA (GenX) municipal 26 2023–2025 0%
Lead 59 1983–2019 7%
7% of limit
Nitrate 12 1993–2016 42%
0% of limit
Nitrite 1 2016 0%
PFHxS municipal 26 2023–2025 0%
PFNA municipal 26 2023–2025 0%
PFOA municipal 26 2023–2025 0%
PFOS municipal 26 2023–2025 0%
Sulfate 1 2016 100%
53% of limit
Uranium 12 2010–2019 8%
0% of limit
E. coli 1 2016 0%
Hardness 1 2016 100%
PFBS municipal 26 2023–2025 0%
pH 1 2016 100%
Sodium 1 2016 100%
Total Coliform 1 2016 0%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across TX.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 191 samples
  • Manganese 147 samples
  • Fluoride 262 samples
  • Arsenic 59 samples
  • Lead 59 samples

Limited data (<15 samples) — interpret with caution

  • Radon 1 sample
  • Chloride 1 sample
  • Nitrate 12 samples
  • Nitrite 1 sample
  • Sulfate 1 sample
  • Uranium 12 samples
  • E. coli 1 sample
  • Hardness 1 sample
  • pH 1 sample
  • Sodium 1 sample
  • Total Coliform 1 sample

No private-well PFAS data for Fannin County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Fannin County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Fannin County

23 Active public water systems
42,114 Residents on public water

Public water systems in Fannin County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

CDC Health Outcome Correlations

Where contaminants detected in Fannin County have established associations with specific health outcomes, we cross-reference CDC PLACES county-level prevalence data. This is a contextual signal, not a causal claim.

Contaminant Associated Condition Fannin County Prevalence TX Average Source Year
Radon Cancer prevalence 7.2% 6.1% 2020

Source: CDC PLACES county-level estimates. Raw data: Download Fannin County CDC PLACES data →

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in TX with at least one sample for that analyte.

Last updated: 2026-07-15

Full methodology →