Data & Methodology — Jackson County

Full contaminant data, sample history, and sourcing for Jackson County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

4478 total samples analyzed across 19 analytes. Data spans 1975 to 2017.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. OH Avg
Manganese 3 1975–1979 67%
6950% of limit ↑ 1521% above
Iron 65 1975–1982 98%
253% of limit ↓ 53% below
Sulfate 70 1975–2017 100%
57% of limit ~ typical
HFPO-DA (GenX) municipal 12 2023–2024 0%
0% of limit
PFHxS municipal 12 2023–2024 0%
0% of limit
PFOS municipal 12 2023–2024 0%
0% of limit
PFNA municipal 12 2023–2024 0%
0% of limit
PFOA municipal 12 2023–2024 0%
0% of limit
Fluoride 4 1978–1997 75%
5% of limit ↓ 70% below
Chloride 23 1975–1997 96%
3% of limit ↓ 94% below
PFBS municipal 12 2023–2024 0%
Fecal Coliform 1 1978 0%
Nitrate 1 1978 0%
Sodium 10 1978–1997 90% ↓ 90% below
Arsenic 1 1979 0%
Hardness 1 1979 0%
Nitrite 1 1980 0%
pH 18 1975–2005 100% ↓ 30% below
Lead 1 1997 0%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across OH.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 65 samples
  • Sulfate 70 samples
  • Chloride 23 samples
  • pH 18 samples

Limited data (<15 samples) — interpret with caution

  • Manganese 3 samples
  • Fluoride 4 samples
  • Fecal Coliform 1 sample
  • Nitrate 1 sample
  • Sodium 10 samples
  • Arsenic 1 sample
  • Hardness 1 sample
  • Nitrite 1 sample
  • Lead 1 sample

No private-well PFAS data for Jackson County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Jackson County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Jackson County

6 Active public water systems
36,458 Residents on public water

Public water systems in Jackson County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in OH with at least one sample for that analyte.

Last updated: 2026-05-28

Full methodology →