Data & Methodology — Guernsey County

Full contaminant data, sample history, and sourcing for Guernsey County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

105 well testing events on record, covering 17 analytes. Data spans 1959 to 2015.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. OH Avg
Iron 94 1976–2014 98%
1012% of limit ↑ 86% above
Manganese 94 1976–2014 94%
135% of limit ↓ 69% below
PFOA municipal 11 2023–2025 64%
138% of limit
Arsenic 68 1976–2014 96%
60% of limit ↑ 27% above
Sulfate 37 1976–2014 100%
19% of limit ↓ 67% below
Chloride 94 1976–2014 100%
13% of limit ↓ 70% below
Fluoride 66 1976–2014 98%
8% of limit ↓ 54% below
HFPO-DA (GenX) municipal 11 2023–2025 0%
Lead 72 1976–2014 72%
0% of limit ↓ 100% below
Nitrate 3 1986–1989 100%
0% of limit ↓ 100% below
PFHxS municipal 11 2023–2025 0%
PFNA municipal 11 2023–2025 0%
PFOS municipal 11 2023–2025 0%
Sodium 94 1976–2014 100%
~ typical
pH 68 1976–2005 100%
~ typical
PFBS municipal 11 2023–2025 0%
Hardness 70 1976–2014 100%
↓ 42% below

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across OH.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 94 samples
  • Manganese 94 samples
  • Arsenic 68 samples
  • Sulfate 37 samples
  • Chloride 94 samples
  • Fluoride 66 samples
  • Lead 72 samples
  • Sodium 94 samples
  • pH 68 samples
  • Hardness 70 samples

Limited data (<15 samples) — interpret with caution

  • Nitrate 3 samples

No private-well PFAS data for Guernsey County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Guernsey County. PFAS has been detected in local public water systems (UCMR 5 data) — indicated by the "municipal" badge in the table above — but this does not directly indicate private well contamination. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Guernsey County

14 Active public water systems
32,470 Residents on public water
15% Households on private wells

Public water systems in Guernsey County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

CDC Health Outcome Correlations

Where contaminants detected in Guernsey County have established associations with specific health outcomes, we cross-reference CDC PLACES county-level prevalence data. This is a contextual signal, not a causal claim.

Contaminant Associated Condition Guernsey County Prevalence OH Average Source Year
Arsenic Cancer prevalence 7.9% 6.8% 2020
Arsenic Kidney disease rate 3.0% 3.1% 2020

Source: CDC PLACES county-level estimates. Raw data: Download Guernsey County CDC PLACES data →

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in OH with at least one sample for that analyte.

Last updated: 2026-07-15

Full methodology →