Data & Methodology — Wexford County

Full contaminant data, sample history, and sourcing for Wexford County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

11 well testing events on record, covering 20 analytes. Data spans 1976 to 2012.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. MI Avg
Iron 8 1976–1990 88%
150% of limit ↓ 24% below
Manganese 8 1976–1990 88%
130% of limit ~ typical
Uranium 2 1976–1979 100%
3% of limit ↑ 281% above
Arsenic 8 1976–1990 50%
25% of limit ↓ 22% below
Chloride 8 1976–1990 100%
1% of limit ↓ 96% below
Fluoride 8 1976–1990 75%
6% of limit ↓ 21% below
HFPO-DA (GenX) municipal 4 2024–2025 0%
Lead 1 1979 0%
Nitrate 2 1976–1979 100%
1% of limit ↓ 81% below
Nitrite 2 1976–1979 50%
4% of limit ↑ 817% above
PFHxS municipal 4 2024–2025 0%
PFNA municipal 4 2024–2025 0%
PFOA municipal 4 2024–2025 0%
PFOS municipal 4 2024–2025 0%
Radon 1 1991 100%
3% of limit ↓ 92% below
Sulfate 8 1976–1990 88%
5% of limit ↓ 68% below
Sodium 8 1976–1990 100%
↓ 77% below
PFBS municipal 4 2024–2025 0%
pH 9 1976–1991 100%
~ typical
Hardness 8 1976–1990 100%
↑ 73% above

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across MI.

Data Coverage & Gaps

Limited data (<15 samples) — interpret with caution

  • Iron 8 samples
  • Manganese 8 samples
  • Uranium 2 samples
  • Arsenic 8 samples
  • Chloride 8 samples
  • Fluoride 8 samples
  • Lead 1 sample
  • Nitrate 2 samples
  • Nitrite 2 samples
  • Radon 1 sample
  • Sulfate 8 samples
  • Sodium 8 samples
  • pH 9 samples
  • Hardness 8 samples

No private-well PFAS data for Wexford County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Wexford County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Wexford County

113 Active public water systems
27,434 Residents on public water
19% Households on private wells

Public water systems in Wexford County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in MI with at least one sample for that analyte.

Last updated: 2026-07-15

Full methodology →