Data & Methodology — Wayne County

Full contaminant data, sample history, and sourcing for Wayne County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

25381 total samples analyzed across 21 analytes. Data spans 1960 to 2022.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. MI Avg
Iron 18 1960–1980 94%
53% of limit ↓ 73% below
Chloride 77 1960–2022 99%
36% of limit ↑ 191% above
Manganese 9 1960–1975 89%
45% of limit ↓ 67% below
Sulfate 50 1960–2021 100%
19% of limit ~ typical
PFOS municipal 183 2023–2025 0%
0% of limit
PFHxS municipal 183 2023–2025 0%
0% of limit
PFNA municipal 183 2023–2025 0%
0% of limit
PFOA municipal 183 2023–2025 0%
0% of limit
HFPO-DA (GenX) municipal 183 2023–2025 0%
0% of limit
Fluoride 14 1960–2014 100%
7% of limit ~ typical
Arsenic 2 1970–1974 50%
10% of limit ↓ 69% below
Uranium 1 1986 100%
0% of limit ↓ 89% below
Nitrite 38 1998–2015 97%
1% of limit ~ typical
Total Coliform 1 1969 0%
Lead 1 1974 0%
Sodium 58 1960–2021 100% ↑ 41% above
E. coli 1 2009 0%
pH 9 1960–2008 100% ~ typical
PFBS municipal 183 2023–2025 0%
Nitrate 1 1971 0%
Fecal Coliform 1 1974 0%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across MI.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 18 samples
  • Chloride 77 samples
  • Sulfate 50 samples
  • Nitrite 38 samples
  • Sodium 58 samples

Limited data (<15 samples) — interpret with caution

  • Manganese 9 samples
  • Fluoride 14 samples
  • Arsenic 2 samples
  • Uranium 1 sample
  • Total Coliform 1 sample
  • Lead 1 sample
  • E. coli 1 sample
  • pH 9 samples
  • Nitrate 1 sample
  • Fecal Coliform 1 sample

No private-well PFAS data for Wayne County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Wayne County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Wayne County

55 Active public water systems
1,776,172 Residents on public water
0% Households on private wells

Public water systems in Wayne County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in MI with at least one sample for that analyte.

Last updated: 2026-05-27

Full methodology →