Data & Methodology — Presque Isle County

Full contaminant data, sample history, and sourcing for Presque Isle County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

27663 total samples analyzed across 17 analytes. Data spans 1967 to 2019.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. MI Avg
Manganese 2 1975–1979 50%
200% of limit ↑ 46% above
Iron 4 1975–1979 75%
50% of limit ↓ 75% below
Chloride 23 1967–2010 96%
2% of limit ↓ 84% below
Sulfate 10 1975–2010 90%
4% of limit ↓ 78% below
Fluoride 2 1975–1979 100%
20% of limit ↑ 152% above
PFOS 1 2012 0%
0% of limit
PFNA 1 2012 0%
0% of limit
Arsenic 4 1979–2005 75%
12% of limit ↓ 62% below
Uranium 1 1979 100%
1% of limit ~ typical
Nitrite 6 2005–2017 83%
0% of limit ↓ 72% below
PFOA 10 2010–2012 0%
0% of limit
Lead 1 1975 0%
Nitrate 1 1979 0%
pH 114 1967–2011 63% ↓ 80% below
Hardness 4 1995–2014 75% ~ typical
Sodium 35 1975–2019 97% ↓ 83% below
E. coli 1 2010 0%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across MI.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Chloride 23 samples
  • pH 114 samples
  • Sodium 35 samples

Limited data (<15 samples) — interpret with caution

  • Manganese 2 samples
  • Iron 4 samples
  • Sulfate 10 samples
  • Fluoride 2 samples
  • PFOS 1 sample
  • PFNA 1 sample
  • Arsenic 4 samples
  • Uranium 1 sample
  • Nitrite 6 samples
  • PFOA 10 samples
  • Lead 1 sample
  • Nitrate 1 sample
  • Hardness 4 samples
  • E. coli 1 sample

Public vs. Private Water in Presque Isle County

52 Active public water systems
9,131 Residents on public water
30% Households on private wells

Public water systems in Presque Isle County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in MI with at least one sample for that analyte.

Last updated: 2026-05-27

Full methodology →