Data & Methodology — Muskegon County

Full contaminant data, sample history, and sourcing for Muskegon County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

15466 total samples analyzed across 20 analytes. Data spans 1974 to 2019.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. MI Avg
Iron 26 1974–2002 96%
230% of limit ~ typical
Manganese 23 1974–2019 96%
86% of limit ↓ 37% below
Chloride 59 1974–2015 97%
11% of limit ~ typical
Sulfate 35 1974–2018 100%
8% of limit ↓ 53% below
Fluoride 11 1974–1988 100%
18% of limit ↑ 120% above
Nitrite 10 2002–2012 90%
1% of limit ↓ 37% below
Arsenic 6 1974–1987 83%
30% of limit ~ typical
PFHxS municipal 40 2023–2025 0%
0% of limit
PFNA municipal 40 2023–2025 0%
0% of limit
PFOS municipal 40 2023–2025 0%
0% of limit
HFPO-DA (GenX) municipal 40 2023–2025 0%
0% of limit
PFOA municipal 40 2023–2025 0%
0% of limit
Nitrate 32 2001–2012 97%
2% of limit ↓ 42% below
Uranium 4 1988 100%
1% of limit ↓ 21% below
PFBS municipal 40 2023–2025 0%
Sodium 39 1974–2018 100% ~ typical
pH 30 1974–2012 83% ↓ 28% below
Hardness 7 1994–1995 100% ↑ 62% above
E. coli 1 2008 0%
Lead 1 1974 0%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across MI.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 26 samples
  • Manganese 23 samples
  • Chloride 59 samples
  • Sulfate 35 samples
  • Nitrate 32 samples
  • Sodium 39 samples
  • pH 30 samples

Limited data (<15 samples) — interpret with caution

  • Fluoride 11 samples
  • Nitrite 10 samples
  • Arsenic 6 samples
  • Uranium 4 samples
  • Hardness 7 samples
  • E. coli 1 sample
  • Lead 1 sample

No private-well PFAS data for Muskegon County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Muskegon County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Muskegon County

217 Active public water systems
151,808 Residents on public water
14% Households on private wells

Public water systems in Muskegon County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in MI with at least one sample for that analyte.

Last updated: 2026-05-27

Full methodology →