Data & Methodology — Dickinson County

Full contaminant data, sample history, and sourcing for Dickinson County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

2642 total samples analyzed across 20 analytes. Data spans 1912 to 2016.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. MI Avg
Manganese 12 1970–1974 92%
188% of limit ↑ 37% above
Sulfate 11 1965–1971 91%
5% of limit ↓ 69% below
Fluoride 24 1970–1996 100%
6% of limit ↓ 23% below
Uranium 4 1986–1988 100%
1% of limit ~ typical
HFPO-DA (GenX) municipal 8 2024–2025 0%
0% of limit
PFHxS municipal 8 2024–2025 38%
0% of limit
PFNA municipal 8 2024–2025 0%
0% of limit
PFOS municipal 8 2024–2025 0%
0% of limit
PFOA municipal 8 2024–2025 0%
0% of limit
Chloride 47 1965–2016 100%
1% of limit ↓ 94% below
pH 9 1912–2007 100% ~ typical
Nitrite 1 2012 0%
Hardness 6 1988–1991 100% ↓ 24% below
Lead 1 1971 0%
Arsenic 1 1971 0%
Sodium 46 1970–2012 100% ↓ 40% below
Fecal Coliform 1 1992 0%
Nitrate 1 1969 0%
Iron 1 1972 0%
PFBS municipal 8 2024–2025 25%

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across MI.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Fluoride 24 samples
  • Chloride 47 samples
  • Sodium 46 samples

Limited data (<15 samples) — interpret with caution

  • Manganese 12 samples
  • Sulfate 11 samples
  • Uranium 4 samples
  • pH 9 samples
  • Nitrite 1 sample
  • Hardness 6 samples
  • Lead 1 sample
  • Arsenic 1 sample
  • Fecal Coliform 1 sample
  • Nitrate 1 sample
  • Iron 1 sample

No private-well PFAS data for Dickinson County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Dickinson County. PFAS has been detected in local public water systems (UCMR 5 data) — indicated by the "municipal" badge in the table above — but this does not directly indicate private well contamination. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Dickinson County

34 Active public water systems
23,369 Residents on public water
10% Households on private wells

Public water systems in Dickinson County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in MI with at least one sample for that analyte.

Last updated: 2026-05-27

Full methodology →