Data & Methodology — Branch County

Full contaminant data, sample history, and sourcing for Branch County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

27 well testing events on record, covering 19 analytes. Data spans 1964 to 2022.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. MI Avg
Manganese 17 1975–2022 100%
187% of limit ↑ 36% above
Iron 18 1975–2022 67%
288% of limit ↑ 46% above
Chloride 20 1964–2022 100%
5% of limit ↓ 63% below
Sulfate 20 1964–2022 100%
3% of limit ↓ 79% below
Arsenic 7 1975–2021 100%
4% of limit ↓ 88% below
Fluoride 17 1975–2022 94%
2% of limit ↓ 73% below
HFPO-DA (GenX) municipal 2 2023–2024 0%
Lead 8 1975–2021 62%
3% of limit ↓ 70% below
Nitrate 23 1964–2022 57%
19% of limit ↑ 378% above
Nitrite 21 1973–2022 38%
1% of limit ↑ 118% above
PFHxS municipal 2 2023–2024 0%
PFNA municipal 2 2023–2024 0%
PFOA municipal 2 2023–2024 0%
PFOS municipal 2 2023–2024 0%
Uranium 1 1984 100%
3% of limit ↑ 229% above
Sodium 17 1975–2022 100%
↓ 74% below
pH 23 1964–2022 100%
~ typical
PFBS municipal 2 2023–2024 0%
Hardness 20 1964–2022 100%
↑ 259% above

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across MI.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Manganese 17 samples
  • Iron 18 samples
  • Chloride 20 samples
  • Sulfate 20 samples
  • Fluoride 17 samples
  • Nitrate 23 samples
  • Nitrite 21 samples
  • Sodium 17 samples
  • pH 23 samples
  • Hardness 20 samples

Limited data (<15 samples) — interpret with caution

  • Arsenic 7 samples
  • Lead 8 samples
  • Uranium 1 sample

No private-well PFAS data for Branch County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Branch County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Branch County

82 Active public water systems
33,322 Residents on public water
26% Households on private wells

Public water systems in Branch County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in MI with at least one sample for that analyte.

Last updated: 2026-07-15

Full methodology →