Data & Methodology — Barry County

Full contaminant data, sample history, and sourcing for Barry County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

32 well testing events on record, covering 19 analytes. Data spans 1966 to 2018.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. MI Avg
Iron 23 1966–1987 100%
93% of limit ↓ 53% below
Manganese 8 1978–1987 100%
70% of limit ↓ 49% below
Sulfate 23 1966–1987 100%
13% of limit ↓ 21% below
Chloride 23 1966–1987 100%
3% of limit ↓ 79% below
Arsenic 8 1978–1987 62%
30% of limit ~ typical
Fluoride 23 1966–1987 96%
5% of limit ↓ 37% below
HFPO-DA (GenX) municipal 14 2023–2024 0%
Lead 1 1978 0%
Nitrate 16 1965–1978 100%
2% of limit ↓ 55% below
Nitrite 1 1978 100%
1% of limit ↑ 129% above
PFHxS municipal 14 2023–2024 0%
PFNA municipal 14 2023–2024 0%
PFOA municipal 14 2023–2024 0%
PFOS municipal 14 2023–2024 0%
Uranium 1 1978 100%
1% of limit ~ typical
Sodium 8 1978–1987 100%
↓ 69% below
pH 23 1966–1987 100%
~ typical
PFBS municipal 14 2023–2024 14%
Hardness 24 1965–1987 100%
↑ 168% above

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across MI.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 23 samples
  • Sulfate 23 samples
  • Chloride 23 samples
  • Fluoride 23 samples
  • Nitrate 16 samples
  • pH 23 samples
  • Hardness 24 samples

Limited data (<15 samples) — interpret with caution

  • Manganese 8 samples
  • Arsenic 8 samples
  • Lead 1 sample
  • Nitrite 1 sample
  • Uranium 1 sample
  • Sodium 8 samples

No private-well PFAS data for Barry County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Barry County. PFAS has been detected in local public water systems (UCMR 5 data) — indicated by the "municipal" badge in the table above — but this does not directly indicate private well contamination. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Barry County

192 Active public water systems
47,248 Residents on public water
24% Households on private wells

Public water systems in Barry County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in MI with at least one sample for that analyte.

Last updated: 2026-07-15

Full methodology →