Data & Methodology — Baker County

Full contaminant data, sample history, and sourcing for Baker County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

56 well testing events on record, covering 16 analytes. Data spans 1938 to 2015.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. GA Avg
Nitrate 37 1964–2015 100%
16% of limit ↑ 142% above
Sulfate 41 1964–2023 100%
0% of limit ↓ 88% below
Manganese 39 1981–2023 41%
1% of limit ↓ 98% below
Lead 26 1995–2023 46%
1% of limit ↓ 60% below
Radon 8 1993–2002 100%
7% of limit ↓ 62% below
Uranium 26 1995–2023 81%
0% of limit ↓ 54% below
Nitrite 33 1981–2015 12%
1% of limit ↑ 50% above
Manganese 39 1981–2023 41%
1% of limit ↓ 98% below
Lead 26 1995–2023 46%
1% of limit ↓ 60% below
Chloride 50 1964–2023 100%
1% of limit ↓ 34% below
Iron 39 1981–2023 36%
2% of limit ↓ 95% below
Radon 8 1993–2002 100%
7% of limit ↓ 62% below
Uranium 26 1995–2023 81%
0% of limit ↓ 54% below
Hardness 41 1964–2023 100%
↑ 52% above
pH 47 1964–2023 100%
~ typical
Sodium 41 1964–2023 100%
↓ 75% below

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across GA.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Nitrate 37 samples
  • Sulfate 41 samples
  • Manganese 39 samples
  • Lead 26 samples
  • Uranium 26 samples
  • Nitrite 33 samples
  • Manganese 39 samples
  • Lead 26 samples
  • Chloride 50 samples
  • Iron 39 samples
  • Uranium 26 samples
  • Hardness 41 samples
  • pH 47 samples
  • Sodium 41 samples

Limited data (<15 samples) — interpret with caution

  • Radon 8 samples
  • Radon 8 samples

No private-well PFAS data for Baker County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Baker County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Baker County

3 Active public water systems
894 Residents on public water

Public water systems in Baker County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in GA with at least one sample for that analyte.

Last updated: 2026-08-03

Full methodology →