Data & Methodology — Calhoun County

Full contaminant data, sample history, and sourcing for Calhoun County. For readers who want to go beyond the summary.

Contaminant Data — All Analytes

219 well testing events on record, covering 20 analytes. Data spans 1957 to 2022.

Contaminant Samples Years Detection Rate Distribution LowModHigh vs. Limit vs. FL Avg
Iron 34 1963–2024 100%
10% of limit ↓ 95% below
Fluoride 110 1963–2025 100%
3% of limit ↓ 54% below
HFPO-DA (GenX) municipal 6 2025 0%
— —
Arsenic 33 2013–2024 100%
0% of limit ↓ 96% below
Chloride 110 1963–2025 100%
1% of limit ↓ 98% below
PFNA municipal 6 2025 0%
— —
PFOA municipal 6 2025 0%
— —
PFOS municipal 6 2025 0%
— —
Lead 33 2013–2024 100%
1% of limit ↓ 58% below
Manganese 33 2013–2024 100%
7% of limit ↓ 74% below
Nitrate 1 1963 100%
7% of limit ↑ 102% above
PFHxS municipal 6 2025 0%
— —
Sulfate 110 1963–2025 100%
1% of limit ↓ 96% below
Sodium 110 1963–2025 100%
— ↓ 92% below
pH 217 1963–2025 100%
— ↓ 37% below
E. coli 36 2021–2025 100%
— ~ typical
Fecal Coliform 47 2013–2021 100%
— ~ typical
PFBS municipal 6 2025 0%
— —
Hardness 1 1963 100%
— ↓ 99% below
Total Coliform 85 2013–2025 100%
— ~ typical

Distribution shows the share of samples in each concentration band relative to the EPA Maximum Contaminant Level (MCL): Low = below half the MCL, Moderate = between half and the MCL, High = above the MCL. Analytes without an MCL (e.g. sodium, pH) show — in the limit columns. State average is based on county median values across FL.

Compare your result with Calhoun County

Of the 33 arsenic tests on record for Calhoun County (2013–2024), 0% found none, and half were below 50 ng/L.

Of the 110 chloride tests on record for Calhoun County (1963–2025), 0% found none, and half were below 3 mg/L.

Of the 110 fluoride tests on record for Calhoun County (1963–2025), 0% found none, and half were below 130 µg/L.

Of the 34 iron tests on record for Calhoun County (1963–2024), 0% found none, and half were below 30 µg/L.

Of the 33 lead tests on record for Calhoun County (2013–2024), 0% found none, and half were below 0.2 µg/L.

Of the 33 manganese tests on record for Calhoun County (2013–2024), 0% found none, and half were below 3.5 µg/L.

Of the 110 sulfate tests on record for Calhoun County (1963–2025), 0% found none, and half were below 2.65 mg/L.

Have a number from your lab? Enter it to see where it falls. Nothing is sent anywhere.

Want the full picture for your well? Check all your results.

Data Coverage & Gaps

Well-sampled analytes (15+ samples)

  • Iron 34 samples
  • Fluoride 110 samples
  • Arsenic 33 samples
  • Chloride 110 samples
  • Lead 33 samples
  • Manganese 33 samples
  • Sulfate 110 samples
  • Sodium 110 samples
  • pH 217 samples
  • E. coli 36 samples
  • Fecal Coliform 47 samples
  • Total Coliform 85 samples

Limited data (<15 samples) — interpret with caution

  • Nitrate 1 sample
  • Hardness 1 sample

No private-well PFAS data for Calhoun County

We have no private well sampling data for PFAS compounds (PFOA, PFOS, PFNA, and related chemicals) in Calhoun County. PFAS testing for private wells requires a dedicated lab panel (~$300–$500). If you are near a military base, airport, or industrial site, consider testing proactively. Learn more about PFAS →

Public vs. Private Water in Calhoun County

8 Active public water systems
5,069 Residents on public water
70% Households on private wells

Public water systems in Calhoun County are regulated by the EPA and must test and report contaminant levels. Private well owners are responsible for their own testing — there is no routine monitoring of private wells by any government agency.

Data Sources

This report aggregates data from the following public databases:

Methodology

Raw records are downloaded from the Water Quality Portal and normalized to µg/L (ppb). Records are deduplicated by sample ID and date, and certified outliers are excluded. Analyte names are mapped to EPA canonical forms. Detection rates, distribution bands, and MCL comparisons are computed from the normalized dataset.

Distribution bands use the EPA Maximum Contaminant Level as the threshold: concentrations below 50% of the MCL are classed as Low, between 50% and 100% as Moderate, and above 100% as High. For analytes without an MCL (sodium, hardness, pH), distribution is not computed.

State comparison uses the median of county median values across all counties in FL with at least one sample for that analyte.

Last updated: 2026-08-12

Full methodology →